ST ISP1102BSTM

Manufacturer No:

ISP1102BSTM

Manufacturer:

Package:

14-VFQFN Exposed Pad

Description:

14 Terminations 14 Pin Receivers 1 Bits 1/1 Drivers/Receivers 1 Functions

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

ISP1102BSTM information

ST ISP1102BSTM technical specifications, attributes, parameters and parts with similar specifications to ST ISP1102BSTM.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
14-VFQFN Exposed Pad

Number of Pins
14

Packaging
Cut Tape (CT)

Published
2007

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
14

ECCN Code
EAR99

Type
Transceiver

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Subcategory
Line Driver or Receivers

Voltage - Supply
4V~5.5V

Terminal Position
QUAD

Terminal Form
NO LEAD

Number of Functions
1

Supply Voltage
1.8V

Terminal Pitch
0.5mm

Reach Compliance Code
unknown

Pin Count
14

Qualification Status
Not Qualified

Temperature Grade
INDUSTRIAL

Differential Output
YES

Protocol
USB 2.0

Input Characteristics
DIFFERENTIAL SCHMITT TRIGGER

Number of Drivers/Receivers
1/1

Driver Number of Bits
1

Receiver Number of Bits
1

Interface Standard
GENERAL PURPOSE

Number of Transceivers
1

Supply Voltage1-Nom
5V

Output Low Current-Max
0.002A

Out Swing-Min
2.5 V

Length
2.5mm

Width
2.5mm

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for ST ISP1102BSTM.

ISP1102BSTM Overview

This driver chip is excellent for driving common LEDs due to its enhanced 14-VFQFN Exposed Pad package.The package of this receiver is Cut Tape (CT).It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.On any Surface Mount-type PCB or development board, you can install this wide receiver.It takes 4V~5.5V from the power supply to run this differential driver.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.Driver ICs in this category can operate efficiently with a supply voltage range of 1.8V.Wide receiver has 14 terminations built in for driving or receiving signals from data.As a standard package, this transceiver comes with a 14-pin layout that follows the market standard.14-pin driver IC with improved power dissipation control.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.It provided a 1-bit resolution capability with this ic receiver.As a general rule, this receiver has a resolution of 1 bits that is usually specified.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.There are 1 transceivers in total implemented by this IC.It must be below 85°C when the transceiver module's system is operating.This optical transceiver must be able to operate at a minimum of -40°C degrees Celsius during normal operation.To power the ic receiver, sufficient current but not more than 8mA should be supplied to its VCC pin.

ISP1102BSTM Features

Cut Tape (CT) package
14 pin count
14 pins

ISP1102BSTM Applications

There are a lot of ST-Ericsson Inc
ISP1102BSTM Drivers/Receivers/Transceivers applications.

Cordless telephone
Desktop PC
Notebook
Pocket PC
Desktop radio
Clock radio
Tuner
Portable radio
Car radio
Satellite radio receiver

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.